Vortice 12018 Quadro Micro 100I T Flush Centrifugal Extractor Fan (Timer Model)

Sold & shipped by Prime Electrical Group Ltd

Available online only and not stocked in B&Q stores

72.50

Checking availability...

Product details

Product information

Stylish modern and powerful flush mounted centrifugal extractor fan suitable for Bathroom application. The air is extracted laterally through an opening concealed beneath the outer cover and drawn from all around the product.

This model is for operation in conjunction with the room light switch. When the light is switched on the fan comes on, when the light is switched off the fan continues to run for a pre-set time (adjustable). This fan requires permanent live, switched live and neutral (3 wires excluding earth) at the fan position in order to operate correctly. The timer function cannot be used unless you have these three wires available to connect. Please check before ordering!

Suitable for: Recessed
Ducting not included

Features and benefits

Mains voltage 220-240V AC 50Hz. Two speeds, selectable at installation
Extraction rate 21/ 31 litres per second, 75/110 cubic metres per hour (low speed / high speed)
Power consumption 20 / 27 watts (low speed / high speed)
Sound output 25.9/ 33.5 dB(A) @ 3m (low speed / high speed)
Wall or ceiling installation. Backdraught protection
Timer run timer - adjustable between 3 and 20 mins
UKCA & CE certified
Dimensions: 258mm high x 258mm deep x 34mm deep (visible beyond installed surface), 144mm behind installed surface

Specifications

Brand	Vortice
Material	ABS plastic
Colour	White
Product height	258mm
Product width	258mm
Projection from the wall	34mm
Spigot diameter	98mm
Extraction rate	110m³/h
Power voltage supply	220-240V
Noise level at 3m	34dB(A)
Maximum timer duration	20min
Power consumption in use	27W
Room use	Bathroom & WC
IP rating	IPX4
Model name/number	Quadro Micro
Control type	Timer
Overload protection	Overload protection
Timer type	Timer function
Product code	8010300120188