Club members get 20% off selected home. > Shop now
See more Router bits
Trend LOCK/JIG Door Fitter Lock Fitting Router Jig + 12mm Cutter + Corner Chisel
Sold & shipped by Buyaparcel
Available online only and not stocked in B&Q stores
Product details
Product information
Trend LOCK/JIG Lock Jig
Contractor jig with interchangeable templates for use with a plunge router to cut the mortise face-plate recess for popular door locks.
For most common sash mortises dead locks, with up to 3 inch deep mortises a 7/8 inch or 1 inch face-plate.
Deeper mortises can be achieved with a suitable size of auger bit.
Fast, clean accurate results on doors 34mm to 58mm thick, even in hardwood.
Steel plates body.
An auger bit and drill is required to complete deep mortises.
The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.
Door thickness min. 34 mm
Door thickness max. 58 mm
Template outer size 234.3 x 59.8 x1.5mm
Metric (Imperial approx.) (D x OL) Template
22.2x156 mm (7/8"x 6 1/8") 1
22.5x152.5 mm (7/8"x 6") 2
25.4x121 mm (1"x 4 3/4") 3
25.4x127.5 mm (1"x 5") 4
25.4x133.5 mm (1"x 5 1/4") 5
25.4x145 mm (1"x 5 3/4") 6
25.4x153 mm (1"x 6") 7
25.4x156.5 mm (1"x 6") 8
25.4x165.5 mm (1"x 6 1/2") 9
25.4x177 mm (1"x 7") 10
25x57.5 mm (1"x 2 1/4") 11 UPPER
26x56.5 mm (1"x 2 1/4") 11 LOWER
25.6x162mm (1"x 6 3/8") 12
Mortise Lock Dimensions
Imperial (Metric) (D x OL) Template
16x72 mm* (5/8" x 2 7/8") A
16x107 mm* (5/8" x 4 1/4") B
19x78 mm* (3/4" x 3 1/8") C
19x109 mm* (3/4" x 4 1/4") D
24 mm x 24 mm (2 x circle)
*These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer.
3/75X1/2TC - Two flute 12mm dia x 63mm cut
CT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
C/CHISEL - Trend Corner Chisel - To quickly square up rounded corners when using lock and hinge jigs.
Allows a rounded recess in wood to be cut to a square recess
- Guarantee - Statutory
Features and benefits
Specification of the LOCK/JIG Lock Jig Door thickness min. 34 mm Door thickness max. 58 mm Template outer size 234.3 x 59.8 x1.5mm Metric (Imperial approx.) (D x OL) Template 22.2x156 mm (7/8"x 6 1/8") 1 22.5x152.5 mm (7/8"x 6") 2 25.4x121 mm (1"x 4 3/4") 3 25.4x127.5 mm (1"x 5") 4 25.4x133.5 mm (1"x 5 1/4") 5 25.4x145 mm (1"x 5 3/4") 6 25.4x153 mm (1"x 6") 7 25.4x156.5 mm (1"x 6") 8 25.4x165.5 mm (1"x 6 1/2") 9 25.4x177 mm (1"x 7") 10 25x57.5 mm (1"x 2 1/4") 11 UPPER 26x56.5 mm (1"x 2 1/4") 11 LOWER 25.6x162mm (1"x 6 3/8") 12 Mortise Lock Dimensions Imperial (Metric) (D x OL) Template 16x72 mm* (5/8" x 2 7/8") A 16x107 mm* (5/8" x 4 1/4") B 19x78 mm* (3/4" x 3 1/8") C 19x109 mm* (3/4" x 4 1/4") D 24 mm x 24 mm (2 x circle) *These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer.
- Specification of the LOCK/JIG Lock Jig
- Door thickness min. 34 mm
- Door thickness max. 58 mm
- Template outer size 234.3 x 59.8 x1.5mm
- Metric (Imperial approx.) (D x OL) Template
- 22.2x156 mm (7/8"x 6 1/8") 1
- 22.5x152.5 mm (7/8"x 6") 2
Specifications
Brand | Trend |
---|---|
Model name/number | LOCK/JIG 3/75X1/2TC C/CHISEL |
Pack quantity | 1 |
Product code | 5055995593544 |