Teng TCMME11A EVA Tool Kit 333 Piece TENMME11A

The Teng Tools EVA Tool Kit is supplied in the Teng Tools TCW807N 7 drawer roller cabinet with ball bearing slides. All of the tools are laid out in 2-colour pre-cut EVA foam, which is etched with the size or description of the tool. The top layer of the EVA block is black and the bottom layer is red, which clearly shows if any tools are not in their correct place. Comes with the following:

TTEMB11 Pliers Set, 11 Piece:

1 x Heavy-Duty Side Cutters 8in; 1 x High Leverage Combination Pliers 7in; 1 x Long Nose Pliers 8in; 1 x Water Pump Pliers 10in; 4 x Circlip Pliers 7in: Inner Straight, Inner Bent, Outer Straight, Outer Bent; 1 x Long Nose Power Grip Pliers 6in; 2 x Curved Jaw Power Grip Pliers 4in and 10in

TTEMD98N Screwdriver Set, 98 Piece:

Screwdrivers: 2 x TORX: TX8x75 and TX9x75mm and 5 x TPX: TPX10x100, TPX15x100, TPX20x100, TPX25x100 and TPX30x100mm;

Power Thru Screwdrivers: 3 x Slotted: 6.5x100, 8x150 and 10x200mm, and 2 x Phillips: PH2x100 and PH3x150mm;

VDE Screwdrivers: 3 x Slotted: 2.5x75, 4x100 and 5.5x125mm, 3 x Phillips: PH0x60, PH1x8 and PH2x100mm, and 1 x Pozi: PZ2x100mm;

Mini Screwdrivers: 3 x Slotted: 2.0x40, 2.5x40 and 3.0x40mm, 3 x Phillips: PH00x40, PH0x40 and PH1x40mm and 6 x TORX: TX6, TX7, TX8, TX9, TX10 and TX15.

25mm Screwdriver Bits: 9 x Slotted: 0.6x3.5, 0.6x4.5, 0.8x4.0(x2), 0.8x5.5, 1.0x5.5(x2), 1.2x6.5 and 1.6x8.0mm; 9 x Phillips: PH1(x3), PH2(x3) and PH3(x3); 10 x Pozi: PZ1(x3), PZ2(x3) and PZ3(x4); 14 x TORX: TX6, TX7, TX8, TX10, TX15, TX20(x3), TX25(x3), TX27, TX30 and TX40; 9 x TPX: TPX10, TPX15, TPX20(x2), TPX25(x2), TPX27, TPX30 and TPX40; 6 x Hex: 2, 3, 4, 5, 6 and 8mm; 3 x GR: PH2(x3) and 3 x Robertson: 1, 2 and 3;

1 x Ratcheting Bits Driver with 6 assorted bits; 1 x Magnetiser/Demagnetiser; 1 x 1/4in M:1/4in Hexagon Adaptor; 1 x Coupler Adaptor

TTEPS12 General Tools Set, 12 Piece:

1 x UtilityKnife with Spare Blades; 1 x Hack Saw 12in; 1 x Engineers Hammer 800g; 1 x Soft Face Hammer; 2 x Cold Chisels: