Club members get 20% off selected home. > Shop now
See more Frost & water proofers
Raincheck Limestone Sealer 5 Litre - Breathable, Colourless Water Seal for Limestone
Sold & shipped by Safeguard Europe
Available online only and not stocked in B&Q stores
Product details
Product information
Raincheck LS is a colourless water-repellent for limestone based on UV resistant silane-siloxane resins. The composition of Raincheck LS allows the water-repellent material to bond to the carbonates in limestone.
Raincheck LS can be used on old and new buildings to protect against penetrating damp. The product is suitable for the treatment of absorbent limestone rather than very dense types.
- Guarantee - Statutory
- Store in a cool, well ventilated area. Keep container tightly closed. Protect from frost
- Raincheck® LS is supplied ready for use. Two coats should be applied by brush, roller or spray. It is important that the coating is uniform and that sufficient Raincheck® LS is applied, since the success of the treatment depends on this. The second coat should be applied while the first coat is still wet. If treatment is halted for any reason it is advisable to make a light chalk mark to indicate where treatment has ceased. After application, tools should be cleaned with white spirit.
- Legal information: H304: May be fatal if swallowed and enters airways.
Features and benefits
Benefits of using Raincheck LS:
-Rapid curing
-Can be used on old and new buildings to protect against penetrating damp and to keep limestone clean.
-Will not block the pores so water vapour is able to escape.
-Easy to apply by brush or by spray
-Penetrates 2 - 10 mm.
- Provides protection from penetrating damp
- Can be used on old and new buildings
- Easy to apply by brush or by spray
- Rapid curing
- Penetrates 2-10mm
Legal Information
- H304: May be fatal if swallowed and enters airways.
Specifications
Base | Water-based |
---|---|
Coverage per litre | 3.5m²/L |
Drying time | 1-2 days |
Location | Exterior |
Maximum application temperature | 35°C |
Minimum application temperature | 3°C |
Number of pieces | 1 |
Product weight | 5000g |
Recoat time | 30 minutes |
Suitable for | Brick |
Product code | 5060132764053 |