EHC Slim Jim 10kW and Indirect Pre-Plumbed Electric Boiler 180L

The Electric Heating Company recognise that Time is Money and as such developed Electric Boiler & Cylinder Heat Packs that incorporate all the necessary components (with the exception of radiators, radiator valves and pipe-work) for a complete Electric Heating & Hot Water system. The Pre-Plumbed Stainless Steel Unvented Cylinders incorporate pre-wired controls, automatic by-pass, wiring centre, combination valve, temperature and pressure relief valve, tundish, 2 x 2 port valves, filling loop and high efficiency circulating pump.

For properties requiring large amounts of Domestic Hot Water an Indirect Cylinder will re-heat quicker than a Direct Cylinder with a 3kW Immersion Heater.

SlimJim Electric Boiler Packages are available with single phase Boilers from 10kW to 14.4kW with a choice of Indirect Stainless Steel Cylinders from 150L to 210L. As no flue is involved and no gas analysis is required the installation of the system will be a lot quicker than that of a gas system boiler.

When an Electric Boiler is used for heating a property there will also be a requirement for domestic hot water. Although electric instantaneous water heaters are available, if the property has a bath then it is likely that a hot water cylinder will be required.

100% efficient

Virtually silent in operation

Suitable for central heating only or central heating & hot water

Suitable for underfloor heating

No Mandatory Maintenance required

Space Saving Minimalistic Design

2 years Parts & Labour Guarantee

Option of Volt-Free or 230V Control Connections

6 Stage Heating

Easy-Fit Connectors & Sensors

In-Built Fault Finding Diagnostics

High Current Thermal Cut-Out

Water Level Sensor

Insulated Stainless Steel Heat Exchanger